Olympic's CHAMPION XL Package
for bigger pieces that win every time!

o Square 14.5" x 14.5" wide x 6" deep glass fusing kiln
o 0.73 cubic feet .
o Runs on 120 volts - requires 20 amp breaker
o Lid element with for fusing and slumping
o V6-CF Controller: 3-key controller with four user programs, 8 segments for ramp
o up/down and hold times
o Easy access with 18" tall stand
o Furniture Kit - 1 full shelf, 3 each - ½" & 2" posts and a square
o foot of ceramic paper
o Fires to 1700° F

Retail Price: $950 + CA tax and shipping
Sale Price $825 + CA tax and shipping

Olympics 139 FL/120v with Pyrometer
o $645 + CA tax and shipping
o Inside dimensions: 12.25" wide x 9 " deep x 7.5" high,
o Fires to cone 6/2250°F
o 139 Front Loader equipped
o Analog Pyrometer
o Two peephole plugs
o Instruction manual
o Warranty card
o Two-year warranty.

Olympics 139 FL/120v
with V6-CF Kiln Controller
o $980 + CA Tax and shipping
o V6-CF Controller: 3-key controller with four user programs, 8 segments for ramp

Olympics 139 FL/120v Shelf kit
o $35 including shipping + CA tax
o one kiln shelf
o four 1" posts
o one bag of hi fire kiln release

Olympic Hot Box 84 with Pyrometer
o $415 + CA tax and shipping
o Inside dimensions: 8"x 8" wide x 4.5" deep, fires to cone 10/2350°F;
o two peephole plugs, instruction manual,
o warranty card
o one-year warranty

Olympic Hot Box 84 with V6-CF Kiln Controller
o $615 + CA tax and shipping
o V6-CF Controller: 3-key controller with four user programs, 8 segments for ramp

Olympic Hot Box 84 Shelf kit
o $41.40 including shipping + CA tax
o two shelves
o three 1/2" posts
o one bag of hi fire kiln release

Spectrum Glass, HotStart™ Kiln
by Skutt
o A 15-inch top-loading, top firing hexagonal kiln
o Uses common household electrical outlet, UL & ULC approved.
o Accommodates a 13-inch round kilnshelf
o Standard feature: the GlassMaster LT Controller
o 2-year warranty on parts and labor
o 8-inch Stand and Porcelain Peephole Plug included
o Suggested retail, $569 (discounted to $519)

     The new 3-button GlassMaster LT Controller, developed especially for the HotStart™ Kiln, is fully pre-programmed to successfully fire and anneal glass projects up to 1/2-inch (9 mm) in finished thickness.
     The size of the project determines which of three firing options the user selects: Fast, Medium or Slow. Next, the user identifies the Process: Slump, Tack-Fuse or Full Fuse. The user may then define the Process time and temperature (ex: 1500° for 10 minutes) or choose to fire with those variables as they come pre-programmed into the unit (optimized for System 96 products).
     The user also has the ability to ADD TIME and/or ADD TEMPERATURE in 5-minute increments, in order to adjust firing in- process, and to SKIP STEP in order to jump from Process to Annealing at will.
     The GlassMaster LT controller achieves fully automatic firing, and provides simple manual overrides for crafters who wish to exercise more precise control over forming.


   

$627 without Accessory Kit
$660 with Accessory Kit
+ CA tax and shipping

The next generation ring saw. The perfect saw for cutting glass, including dichroic, rippled and fused glass. The entire working part of the saw snaps out of the water bath and contains its own water so that it can be used as a portable hand saw. This allows working on the edges of the pieces that were before too large to bring to the saw such as plate glass, tile and stone. This feature also makes the saw easy to clean.

$350+ CA tax and shipping

o Fewer and longer lasting parts. Extreme extended life means virtually no maintenance.
o Greater blade exposure plus a built-in intense bright white light surrounds the blade while the saw is on. This makes seeing your work easier.
o Constructed with metal reinforced polycarbonate. 3-year warranty.
o The Taurus 3 Ring Saw also cuts in all directions, grinds as it cuts and blades last many times longer than other diamond coated blades.
o Can be disassembled into a hand-held saw.
o Fewer moving parts = less maintenance
o 25% larger work surface than Taurus II
o 3 year warranty
o 1/5 hp motor
o built in, flip up face shield
o greater blade exposure for more challenging cuts
o Bright white LED shines on your work
o .050" 80 grit diamond coated stainless steel blade
o Photo at right shows the power unit removed for use as a hand held saw.

Two machines in one!.  A Diamond router and a diamond disk grinder.  Diamond Tech grinders come with powerful 1/8hp motors which allow them to put up with the most demanding grinding tasks. The 6" disk will make quick work out of all your straight and convex curved pieces. The 1" grinder head allows you to worker inside and outside curves.  Use the bevel block to put the proper angle on the edge of your glass when making jewelry boxes and lamp panels.

FEATURE SUMMARY:
o Grinds inside curves.
o Grinds outside curves.
o Perfect straight edges.
o Fast and accurate.
o Bevels 30° and 45° for lamps and boxes.
o Simplifies working with all types of glass.
o 1" Diamond Bit shapes glass to fit the pattern.
o 6" Diamond Disk smooths rough edges.

THE DIAMOND MAX COMES EQUIPED WTIH THE FOLLOWING
o one 6" 260 grit diamond disk
o one 1" grinder head
o 30° and 45° beveled guides
o 1/8 HP, 3600 RPM motor.
o 100% guaranteed with a full 5-year warranty from Diamond Tech International (excluding disk and grinder head).

$215 + CA tax and shipping.